7 mm - 18 mm Tonehole Resurfacing Set
The Woodwind Tone Hole Resurfacing Kit is one of the most comprehensive and versatile tone hole resurfacing systems available. Designed for woodwind tone holes ranging from 7 mm to 18 mm, each size includes four different angle options, allowing you to precisely match the tone hole angle of virtually any vintage or modern instrument—something no other kit on the market offers.
Constructed from durable resin, the resurfacers are used by applying sanding discs to the working face. This allows you to remove imperfections from the tone hole surface and restore the airtight seal essential for proper woodwind performance.
Each set comes with 48 sanding bits, 3 chamfering bits and 1 mandrel on a storage board.
7 mm - 18 mm Tonehole Resurfacing Set - $175
19 mm - 30 mm Tonehole Resurfacing Set
The 19 mm – 30 mm is designed identically like the 7 mm -18 mm set just in larger sizes . It comes with 48 sanding bits, 2 flat bits, 2 chamfering bits and 2 mandrels on a storage board.
19 mm - 30 mm Bass Clarinet Expansion Tonehole Resurfacing Set - $210
COMING SOON
10 mm - 30 mm Domed Tonehole Resurfacing Set For Bassoon
This set functions similarly to other tonehole resurfacing kits, but features a domed face designed specifically to match bassoon toneholes. Sizes range from 10mm to 30mm, with each size offering five radius options—including flat—allowing precise matching to any bassoon tonehole profile. The image on the left shows a cross-section of the five profiles. The set includes 100 resurfacing bits.
6 mm - 18 mm Cork Pad Beveling Spinners
Cork pads are typically sized to fit tightly against the inner wall of a pad cup. When the pad fits too snugly in the cup, or the shape of the pad does not allow for movement and makes it difficult to level.
Cork Pad Spinners address this issue by allowing you to shape the pad on the cup side with a bevel, step, or radius. This added shaping creates the clearance needed for the pad to float smoothly within the cup while still maintaining full coverage across the diameter.
This kit comes with 12 beveling bits, 6 mm – 18 mm, 2 mandrels on a storage board.
6 mm - 18 mm Cork Pad Beveling Spinners -$110
Yamaha Bari Sax Octave Key Jig
Anyone who has worked on the yamaha bari sax octave system know you need 3 hands to remove the octave keys from a yamaha bari sax and even then, one key usually ends up on the floor. This simple yet effective, timesaving, jig allows you to remove the octave key system in one unit. Just snap on the tabs to each key, slide in connecting rod and remove in one easy step. Comes with 6 key tabs, 2 rocker arm tabs and connecting rod.
Yamaha Bari Sax Octave Key Jig - $45
Oboe Upper Stack Key Jig
Comparable in function to the Yamaha bari sax octave jig, this jig set acts as a “third hand” when removing the upper stack. It saves valuable time by allowing you to remove the entire upper stack as a single unit, rather than struggling to align individual keys. Comes with 5 key tabs and a connection bar.
Oboe Upper Stack Key Jig - $45
Quick Change Air Fitting Kit
The Quick Change Air Fitting Kit is an essential upgrade for any Magnehelic setup. It allows you to switch between different plug sizes quickly and effortlessly, improving efficiency during testing and adjustments.
The kit includes six male connectors for plugs and two female connectors for the Magnehelic air line, providing a convenient and reliable connection system.
Quick Change Air Fitting Kit- $25
Clarinet/Oboe Tenon Sanders
When repairing tenons, achieving a perfectly round surface with a flat file can be challenging. These tenon sanders are designed to match the exact radius of the tenon you’re working on, allowing you to sand a flawless, even curve. Simply attach a small strip of sandpaper to the appropriately sized sander, and you can produce a factory-quality finish that looks like it was turned on a lathe.
The set includes 11 sanders in sizes ranging from 20 mm to 30 mm.
20 mm - 30 mm Tenon Sander Set- $45
3/4 oz Tonehole Sealer
As wooden instruments age, the softer grain can break down, creating tiny fissures in the surface. Around toneholes, these imperfections allow air to escape, resulting in a stuffy tone and reduced response. This tonehole sealer is formulated to penetrate and seal those porous wood fibers, restoring a smooth, airtight surface for proper pad seating.
Unlike CA glue, it remains flexible, preventing cracking or flaking over time. Its self-leveling formula dries within minutes, can be sanded and polished, forming a durable, moisture-resistant seal that maintains both strength and flexibility for long-lasting performance.
3/4 oz Tonehole Sealer - $14
Radius Sanding Blocks
The Radius Sanding Set is a versatile sanding solution designed to match the curved profiles found on oboes, clarinets, bass clarinets, and bassoons. Achieving a perfectly rounded surface by hand with files or sandpaper can be challenging, especially during precision repairs.
This set covers radii from 18mm to 35.5mm in 0.5mm increments, allowing you to accurately match the instrument’s contour for both tenon work and body repairs, including crack filling and refinishing.
The kit includes nine sanding blocks, each featuring four radius sizes, along with a convenient storage peg for easy organization.
18 mm - 35.5mm Radius Sanding Block Set
Flute Pad Builder/Reskinning
Kit
Whether you are building flute pads from scratch or reskinning high-end exclusive pads, this is the most extensive kit on the market specifically designed for the construction of flute pads. Comes with pad die holder, 20 dies in sizes 16mm – 20mm in .25mm increments. It also includes die spacers in .5, 1.0, and 1.5 mm to raise or lower the pad in the die.
